HMD900 – HOUGEN MAG DRILL

$1,089.00

Lightweight, powerful, low cost mag drill
for general fabrication.

• Large 1-1/2″ x 2″ capacity
• Hidden motor cord
• Ergonomic housing
• Increased safety with less maintenance
• Spring slug ejection
• Slot Drive arbor for more accuracy and
quicker change out of accessories
• Many accessories are available for a
portable machine shop including: drill
chucks, countersink, and more…
• Lift detector safety system
• Rear mounted controls
• Two year warranty

SKU: HMD900 Categories: , ,

Description

HMD900 SPECIFICATIONS
Electrical System 115V, 50/60 Hz – 9A, 1035W
Motor 8A (115V), 450 RPM
Diameter 7/16″- 1-1/2″ (12mm – 38mm)
Depth 2″ (50mm)
Cutter/Mount “12,000-Series” & Copperhead™ Carbide cutters, 3/4″ shank
Dimensions 15-1/8″ H x 6-3/4″ W x 11-3/8″ L
(384mm H x 171mm W x 289mm L)
Magnet Base 3.16″ W x 6.10″ L (79mm W x 167mm L)
1″ Plate (25mm) Dead Lift
1952 lb. (885 kg)		 Drillpoint Breakaway
960 lb. (435 kg)
3/8″ Plate (9.5mm) 1460 lb. (662 kg) 720 lb. (327 kg)
Weight 27.7 lb. (12.6 kg)
Need annular cutters for this mag drill? Click here to view!

Need annular cutters for this mag drill? Click here to view

Additional information

Weight 43 lbs
Dimensions 11.625 × 7.75 × 19.625 in
Max Depth

Mag Drill Model

HMD900
Mag Drill Brands

Hougen Mag Drills

Models
HMD900 Models & Part No.
Part No. Description Voltage
HMD900 HMD900 115V

Cutters

HMD900 ANNULAR CUTTERS

 
Want to see all of our annular cutters? Click here to view!

Accessories

HMD900 ACCESSORIES
Drill Chucks
Easily use twist drills with an HMD900. Drill chucks are quickly installed in place of the arbor. Spindle adapters are required to use a drill chuck.
Part No. Description
09377 1/2″ Drill Chuck and Adapter.
Twist Drill Adapter
Easily installs in a Hougen Magnetic Drill* without removing drill arbor and coolant system. Adapter accepts a modified 118° twist drill with a 1/4″ flatted shank that secures in adapter with a set screw. A convenient kit is available containing all items listed below.
Part No. Description
02608 Twist Drill Adapter with Set Screw
02695 Set Screw for Adapter
03835 1/2″ dia. Twist Drill
03837 7/16″ dia. Twist Drill
03839 3/8″ dia. Twist Drill
03841 5/16″ dia. Twist Drill
03843 1/4″ dia. Twist Drill
03845 Twist Drill Adapter Kit

Twist Drill Adapter Kit for Mag Drills
Countersink Kit
Designed for use with Hougen Magnetic Drills, 82° Countersink is double fluted with carbide inserts for maximum cutting action and long life. For holes from 9/16″ to 15/16″ diameters
Part No. Description
12965 82° Countersink Kit includes countersink with inserts & (4) Pilots – 9/16, 11/16, 13/16 & 15/16″ plus a torx wrench
12966 82° Countersink with Carbide Inserts (Does not include pilots)
12960 9/16″ diameter Pilot
12961 11/16″ diameter Pilot
12962 13/16″ diameter Pilot
12963 15/16″ diameter Pilot
05464
 Replacement Screw
05465
 Replacement Wrench
05467 Replacement Carbide Inserts (Box of 10)
Use for mild steel, cast steel & malleable iron
05779 Replacement Carbide Inserts Wear Resistant (Box of 10) Use for structural steel, stainless steel, harder steels & non-ferrous materials
Pipe Adapter Kits
These kits let you drill pipe and tubing with a minimum 3″ diameter and some convex surfaces. Kits quickly attach to your Hougen Magnetic Drill and positive non-slip positioning assures centered hole location.
Part No. Description
02564* Chain mount for model HMD920
* Minimum 3″ diameter schedule 160, maximum 12″ diameter schedule 160 *
Portable Vac-Pad
Vac-Pad works exclusively with the Model HMD900 on non-ferrous materials, diamond plate and materials with surface imperfections up to 3mm deep. Standard shop air provides 761 lbf surface holding power at 85kpa. Safety switch shuts off drill motor if air pressure drops.
Part No. Description
05000 Hougen Vac-Pad
RotaMagic™ Super Concentrated Cutting Fluid
RotaMagic™ Super Concentrated Cutting Fluid is water soluble, biodegradable cutting lubricant that yields a 10:1 ratio when mixed with water. RotaMagic extends tool life and improves cutter performance.
Part No. Description
11741* 1 Pint Bottle
11742* 1 Gallon Bottle
11743 (1) 5 Gallon Pail, makes 55 gallons
11744 (1) 55 Gallon Drum, makes a lot of coolant!
* Individual Products Not for Distributor Purchase *
For SDS Information please click here
RotaGel™ Cutting Lube
RotaGel Cutting Lube is an extremely environmentally friendly lubricant for all types of metals and metal working applications. The blue colored gel assures thorough coverage and provides long lasting superior lubrication. Use with annular cutters, taps, drills, reamers, end mills, & more.
Part No. Description
11748* Single 8oz Tube
* Individual Tube Not for Distributor Purchase *
RotaFoam™ Cutting Fluid
RotaFoam Cutting Fluid is an extremely heavy-duty, high performance foamy lubricant for all types of metals and metal working applications. “Super Sticky” properties make the foam adhere to the metal and stay on longer. The blue colored foam allows you to “See Where You Spray” and also assures thorough coverage. Use with annular cutters, taps, drills, reamers, end mills, & more (Only Available in the US & Canada)
Part No. Description
11747* Single 17oz Can
* Individual Can Not for Distributor Purchase *
Slick-Stik™ Lube
Slick-Stik™Lubricant is softer than other stick lubricants for easy application, providing superior adhesion to the tool, assuring thorough coverage. Use with ferrous and non-ferrous materials. Can be used with all Hougen cutters.
Part No. Description
11745 16 oz. Slick-Stik™ Lubricant
11746 1.68 oz. Mini Slick-Stik™ Lubricant
For SDS Information please click here

Hougen Resources

Videos

You may also like…

Related products