HMD927PSC – COOLANT TANK, SWIVEL BASE & POWER FEED

$2,899.00

  • Max Depth: 2″ (50mm)
  • Max Diameter: 7/16″- 1-5/8″ (12mm – 41mm)

A powerful two speed power feed mag drill with great power to weight ratio.

• Large 1-5/8″ x 2″ capacity
• Powerful high torque Hougen motor and gears
• Two Speed gear box – 250 & 450 RPM
• Pilot light – for low light or no light conditions
• Smart technology optimizes feed rate for
increased tool life and excellent hole quality
• Single handle to engage power feed system
• Selectable manual/power feed mode

• Two stage magnet – 30% increase in power when
motor is turned on
• Positive slug ejection
• Integrated coolant bottle
• Lift detector safety system
• One year warranty

Swivel Base adds even greater versatility:
• Precisely line up your pilot with the holes
center location
• One stroke lock and unlock handle
• Great for horizontal, overhead, tight areas,
and getting out over another piece of steel
• Patented
The HMD927 replaces the HMD925

Out of stock

SKU: HMD927PSC Categories: ,

Description

HMD927 SPECIFICATIONS
Electrical System 115V, 50/60 Hz – 10A, 1150W
Motor 9A (115V), 250/450 RPM
Diameter 7/16″- 1-5/8″ (12mm – 41mm)
Depth 2″ (50mm)
Cutter/Mount “12,000-Series” & Copperhead™ & Fusion™ cutters, 3/4″ shank
Dimensions 22-13/16″ H x 7-11/16″ W x 14-11/16″ L
(579mm H x 195mm W x 373mm L)
Swivel Area 1-1/8″ W x 1-3/8″ L (28.5mm H x 34.9mm W)
Magnet Base 3-1/8″ W x 6-9/16″ L
(79mm W x 167mm L)
1″ Plate(25mm) Dead Lift
1750 lb. (794 kg)
Drillpoint Breakaway
995 lb. (433 kg)
3/8″ Plate(9.5mm) 1310 lb. (594 kg) 710 lb. (322 kg)
Magnet (Swivel) 1″ Plate(25mm) Dead Lift
1340 lb. (608 kg)
Drillpoint Breakaway
Forward – 695 lb. (315 kg)
Back – 835 lb. (379 kg)
3/8″ Plate(9.5mm) 1015 lb. (460 kg) Forward – 503 lb. (228 kg)
Back – 605 (274 kg)
Weight 43 lb. (19.5 kg) • Shipping 56 lb (25.4 kg)
Weight (Swivel) 46 lb. (25.4 kg) • Shipping 59 lb (26.8 kg)

Additional information

Max Depth

Max Dia.

Mag Drill Model

HMD927

Mag Drill Brands

Hougen Mag Drills

Models

<table class=”product-table model-table”>
<tbody>
<tr>
</tr>
<tr>
<td style=”vertical-align: top;” colspan=”8″>
<table>
<tbody class=”min-padding” align=”center”>
<tr>
<th class=”sub-table-header” colspan=”8″ align=”center”>HMD927 Models &amp; Part No.</th>
</tr>
<tr>
<td colspan=”8″ align=”center”>
<p>* All drills include: pint of coolant, safety chain, &amp; hex wrenches.</p>
</td>
</tr>
<tr>
<td class=”sub-header “>Part No.</td>
<td class=”sub-header”>Description</td>
<td class=”sub-header”>Voltage</td>
<td class=”sub-header”>Coolant Bottle</td>
<td class=”sub-header”>Swivel</td>
<td class=”sub-header” style=”
“>Cutter Kit</td>
<td class=”sub-header”>CSA</td>
<td class=”sub-header”>Special Plug</td>
</tr>
<tr>
<td><a href=”https://www.canadamagdrills.ca/product/hmd927cp-coolsnt-tank-power-feed/”>HMD927CP</a></td>
<td>HMD927</td>
<td>115V</td>
<td>X</td>
<td></td>
<td></td>
<td>X</td>
<td></td>
</tr>
<tr>
<td><a href=”https://www.canadamagdrills.ca/product/hmd927psc-coolant-tank-swivel-base-power-feed/”>HMD927PSC</a></td>
<td>HMD927</td>
<td>115V</td>
<td>X</td>
<td>X</td>
<td></td>
<td>X</td>
<td></td>
</tr>
</tbody>
</table>
</td>
</tr>
</tbody>
</table>

Cutters

HMD927PSC ANNULAR CUTTERS

Accessories

HMD927CP ACCESSORIES
Drill Chucks
Easily use twist drills with an HMD927. Drill chucks are quickly installed in place of the arbor. Spindle adapters are required to use a drill chuck.

  • Must be used in manual mode.
Part No. Description
10731 1/2″ Hougen Chuck with key
10732 1/2″ Jacobs Chuck with key
07930 Replacement key for 1/2″ chucks
08186 Spindle Adapter for HMD927

New Slot Drive Arbor Systems

Twist Drill Adapter
Easily installs in a Hougen Magnetic Drill* without removing drill arbor and coolant system. Adapter accepts a modified 118° twist drill with a 1/4″ flatted shank that secures in adapter with a set screw. A convenient kit is available containing all items listed below.

  • Must be used in manual mode.
Part No. Description
02608 Twist Drill Adapter with Set Screw
02695 Set Screw for Adapter
03835 1/2″ dia. Twist Drill
03837 7/16″ dia. Twist Drill
03839 3/8″ dia. Twist Drill
03841 5/16″ dia. Twist Drill
03843 1/4″ dia. Twist Drill
03845 Twist Drill Adapter Kit

Twist Drill Adapter Kit for Mag Drills

Tapping Kits
Lightweight, easy to install design incorporates a planetary gear reverse with a 1:1 ratio. Reversing speed is equal to spindle speed so in-feed and out-feed of the unit can be employed without reversing motor direction. Tapping Kits are not recommended for use with swivel base drills.

  • Must be used in manual mode.
Tapping Kit Collet Tap Cap. inches
08177 (Slot Drive – includes adapter 08176) 02495
02496
#6 – 1/4″
1/4″ – 1/2″

Tap a Hole in Seconds with a Hougen Magnetic Drill

Countersink Kit
Designed for use with Hougen Magnetic Drills, 82° Countersink is double fluted with carbide inserts for maximum cutting action and long life. For holes from 9/16″ to 15/16″ diameters

  • Must be used in manual mode.
Part No. Description
12965 82° Countersink Kit includes countersink with inserts & (4) Pilots – 9/16, 11/16, 13/16 & 15/16″ plus a torx wrench
12966 82° Countersink with Carbide Inserts (Does not include pilots)
12960 9/16″ diameter Pilot
12961 11/16″ diameter Pilot
12962 13/16″ diameter Pilot
12963 15/16″ diameter Pilot
05464
Replacement Screw
05465
Replacement Wrench
05467 Replacement Carbide Inserts (Box of 10)
Use for mild steel, cast steel & malleable iron
05779 Replacement Carbide Inserts Wear Resistant (Box of 10) Use for structural steel, stainless steel, harder steels & non-ferrous materials
Pipe Adapter Kits
These kits let you drill pipe and tubing with a minimum 3″ diameter and some convex surfaces. Kits quickly attach to your Hougen Magnetic Drill and positive non-slip positioning assures centered hole location.

  • Must be used in manual mode.
Part No. Description
02564* Chain mount for model HMD927
* Minimum 3″ diameter schedule 160, maximum 12″ diameter schedule 160 *
RotaMagic™ Super Concentrated Cutting Fluid
RotaMagic™ Super Concentrated Cutting Fluid is water soluble, biodegradable cutting lubricant that yields a 10:1 ratio when mixed with water. RotaMagic extends tool life and improves cutter performance.
Part No. Description
11741* 1 Pint Bottle
11742* 1 Gallon Bottle
11743 (1) 5 Gallon Pail, makes 55 gallons
11744 (1) 55 Gallon Drum, makes a lot of coolant!
* Individual Products Not for Distributor Purchase *
For SDS Information please click here
RotaGel™ Cutting Lube
RotaGel Cutting Lube is an extremely environmentally friendly lubricant for all types of metals and metal working applications. The blue colored gel assures thorough coverage and provides long lasting superior lubrication. Use with annular cutters, taps, drills, reamers, end mills, & more.
Part No. Description
11748* Single 8oz Tube
* Individual Tube Not for Distributor Purchase *
RotaFoam™ Cutting Fluid
RotaFoam Cutting Fluid is an extremely heavy-duty, high performance foamy lubricant for all types of metals and metal working applications. “Super Sticky” properties make the foam adhere to the metal and stay on longer. The blue colored foam allows you to “See Where You Spray” and also assures thorough coverage. Use with annular cutters, taps, drills, reamers, end mills, & more (Only Available in the US & Canada)
Part No. Description
11747* Single 17oz Can
* Individual Can Not for Distributor Purchase *
Slick-Stik™ Lube
Slick-Stik™Lubricant is softer than other stick lubricants for easy application, providing superior adhesion to the tool, assuring thorough coverage. Use with ferrous and non-ferrous materials. Can be used with all Hougen cutters.
Part No. Description
11745 16 oz. Slick-Stik™ Lubricant
11746 1.68 oz. Mini Slick-Stik™ Lubricant
For SDS Information please click here

Hougen Resources

Videos

You may also like…